จาระบีสำหรับงานประกอบเครื่อง ยี่ห้อ Redline Racing Grade Red Line Assembly Lube 4oz(114 g)Redline by KPTImport
Assembly Lube
จาระบีสำหรับงานประกอบเครื่อง
Prepares potential wear surface and prevents metal contact before adequate lubrication can be supplied
Unlike other assembly lubes Red Lines will not plug filters after initial engine start-up
Provides 3x greater film strength than conventional black Molybdenum Disulfide greases
Excellent rust and corrosion inhibitor allows for long-term storage For use on camshafts lifters pushrods piston skirts main and rod bearings and bolt threads
Do not use on exhaust bolts or other high temperature bolts which require an anti-seize
Recommended and used by top camshaft and drivetrain manufacturers
ABOUT RED LINE GREASE AND ASSEMBLY LUBE
Used by many of the best engine builders engineers and technicians in Formula 1 GP2 Formula 3 NASCAR NHRA and WRC
MORE TECHNICAL INFORMATION
Color Red
Timken OK Load 100+ pounds
Rust Test D1743 Pass
Rust Test 100%
Relative Humidity Pass - Two years - No Rust
Copper Corrosion
3 Hrs @ 100°C 1B
Red Line Assembly Lube is designed to be used as a lubricant to apply to potential wear surfaces before assembly in order to prevent metal contact upon startup before adequate lubrication is supplied. This product will mix with the oil and not plug filters and can be used on all lubricated parts such as cams followers pistons and bearings and bolt threads. Use only a small amount on bearing and piston surfaces - too much can make it difficult to turn over the engine. Do not use on exhaust bolts or other high
temperature bolts which require an anti-seize.
(4.67)
