Yotome Ak-Kb-812 รีโมทควบคุม Duplicator 315/433MHz สําหรับประตูโรงรถ

** Welcome to Yotome! Please look carefully at the product details before ordering. If you have any questions please ask customer service (Monday-Friday 9am-6pm) I hope to bring you a good shopping experience!

AK-KB-812 Copy Cloning Duplicator 315/433MHz Smart Wireless Remote Control Switch DC 3V for Electric Gate Garage Door
Description:
The AK-K200812 tortoise shell copy remote controller adopts SA901B master control chip supports online programming can be burned repeatedly has built-in EEPROM can copy other common remote controllers with the same frequency can clear codes at any time is convenient and fast to use and can be used in automobile remote control lighting control smart home remote control and other fields.

Feature:
Rubber keys. Frosted texture soft non slip and silent
Conseal led. Know the operation status like the back of your hand
Round and slim pebble like and smooth with both hand feel and texture;
Small volume strong signal and simple operation.

Specification:
Model: AK-KB-812
Color: Black
Operating frequency: 315 MHz / 433.92 MHz (optional);
Power supply scheme: DC3V (button battery 2032) power supply;
Standby current: less than 0.15uA;
Good selectivity and stray radiation suppression ability;
Good local oscillator radiation suppression ability;
Temperature range: - 20-70 ℃ it can work normally even under harsh ambient temperature;
Normal working voltage: DC2.4V-3V
Emission current: < 20mA
Static current: < 0.15uA
Launch distance: > 25m
Product size: 60 * 37.4 * 11.4 (mm) (including shell)
Product weight: 14.39g (including shell)

Function:
(1) Copy code operation
If the remote control is over code you need to clear the code to correct the code. Code matching operation: press the single key of the copied remote controller and the copied remote controller at the same time until the indicator light of the copied remote controller flashes from fast to constant then release the two remote controller keys and the code matching is successful. Other keys are also operated in this way until all keys are copied.
(2) Code clearing operation
Press and hold the lock off and unlock keys of the copy remote control at the same time until the indicator flashes for 3 times and then briefly press the unlock key for 3 times. The continuous flash of the indicator indicates that the code clearing is successful (the lock off key is pressed all the time in this process).
(3) Recovery code operation
Press and hold the mute and ring buttons of the copy remote control at the same time until the indicator flashes and the previously cleared remote control code can be restored.

Attention:
(1) The working voltage shall not exceed 1V of the normal working voltage.
(2) In the environment with large wireless interference the transmission distance may be reduced.
(3) Keep out of the reach of children.
(4) Do not use it in a humid environment otherwise it may cause damage to the remote control.

Note:
Due to the different monitor and light effect the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.


Included:

1 x Copy Duplicator