Magigoo Glue for 3D printing (---)

Product description:
All you need for sure adhesion of 3D prints Magigoo is an easy to use 3D printing adhesive designed to address the first layer not sticking problem. Magigoo ensures a strong adhesion to the hot plate. But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick! In addition Magigoo helps to prevent warping. Isnt it magic? Regardless of you being a hobbyist or professional - it is extremely rewarding to have a 30 hour print complete without any warping and having it release easily once cooled.

MAGIGOO PC is designed to work exclusively with polycarbonate type filaments. This adhesive for professional use makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down.

MAGIGOO Flex is designed for professional use to work exclusively with TPU (thermoplastic polyurethane) TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.

MAGIGOO PA is designed for professional use to work exclusively with Polyamide filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.

Magigoo PP the adhesive specifically designed for 3D printing in polypropylene plastics. It offers a strong adhesion platform for polypropylene based filaments.

Magigoo is an easy to use 3D printing adhesive designed to reduce warping in FDM/FFF 3D printers. Warping among other factors is caused by the differential cooling of a print during a 3D printing process.

For printing repeatedly and reliably remember to apply Magigoo PP on your print bed before printing in polypropylene filaments.

Important note : The applicator has an active spring valve which activates when applicator is pressed against the build plate. Please do not press the bottle as ketchup bottle otherwise the applicator may pop off. Bottle may be slightly squeezed only when the nib is pressed against the bed and it may be necessary only if bigger flow is required. Bottle must not be squeezed when cap is off any other time as it may result in glue popping out of the bottle.