กุญแจรีโมท 4 ปุ่ม 433 . 92 mhz สําหรับประตูรถยนต์

Description:

Note: please read carefully before buying.

1. This remote control can duplicator 433.92 Mhz came remote control as below:
TOP432SA
TOP432A TOP434A
TOP432EV TOP434EV
TOP432M TOP434M
TOP432NA TOP434NA
TOP432S T432 T434
TWIN2 TWIN4
TAM432SA
T432 CAMET434
TOP432A TOP434A
TOP432

2. Your remote control photo must be the same as us if not useless.
Before purchasing please confirm whether your remote control can be supported or not.
Our remote control can copy fixed codes and learning codes (common chips include PT2262 PT2264 PT2260 PT2240 EV1527 FP527 etc.) rather than stealth codes. It cannot copy the original car remote control two-way remote control and the rolling code remote control (rolling code chips generally start with HCS such as HCS200 HCS201 HCS300 HCS301 etc.)

Characteristics:
With this remote clone you can clone all key codes 433.92 MHz with fixed code.
Some remotes that use this frequency are listed below. This is not a complete list!
If your remote control uses the frequency 433.92 MHZ it will work with the remote duplicator

(Note: rolling code remote controls will not work)

Specifications:
Operating frequency: 433 MHz
Weight: 30g
Size: 55mm x 28mm x 14mm
Distance: up to 100 meters

Package Included
1 x Remote control


opy method:
1. Code cleanup method:
Press button A and button B at the same time (some shells are the lock button and the unlock button) after the LED indicator light flashes three times loosen one of the buttons while the other is held down by pressing then press the released button three times the LED indicator will enter the fast flashing state. At this moment all the memory data is erased the cleaned remote control will not have an LED light indicator no matter which button you press

2. Copy method
One hand keeps the original remote control while another keeps the copy remote control the two remote controls should be placed as close as possible (the ideal situation is to put the two remote controls on the desk side by side with zero distance ) press the copy button respectively When the LED indicator light flashes quickly after three flashes this copy is successful other key operating methods are the same. Some remote controls have lower transmission power so the original remote control must be placed back to the copy remote control to operate. For the presence of noise it should avoid interference to operate if the copy is not successful it should recopy after erasing the code.